On November 18, the Yangtze River Daily reporter learned that Wuhan XinWeiqi Technology Co., Ltd. successfully delivered China's first and the world's largest tonnage of J58ZK-6300 servo direct drive CNC electric screw press to Shaanxi Changyu Aviation Equipment Co., LTD., which will be used for the manufacture of key components of aviation engines such as large fan blades.
As the largest blade in the engine, the aero-engine fan blade undertakes the critical task of pushing large amounts of air into the engine and providing more than 80% of the total thrust, and its size and complex structure determine the extremely high requirements for material properties, geometric accuracy and manufacturing processes. The J58ZK-6300 servo direct drive electric screw press independently developed and manufactured by XinWeiqi realizes the near-net forming and efficient forging of large-size fan blades with its high precision, strong forming force and flexible production capacity, filling the gap in this field in China.
According to the report, the nominal pressure of the equipment reaches 63,000 kN, the long-term allowable load of 100,000 kN, the fuselage adopts the whole cast steel structure, the height of nearly 11 meters, the application of self-developed large torque permanent magnet synchronous ring motor direct drive, to achieve zero transmission, no noise, maintenance-free, matching the self-developed special CNC system, The striking energy, deformation rate and slider position in forging process can be accurately controlled. The combination of large tonnage and high precision solves the contradiction between high-end forging accuracy and forming efficiency. "The design and performance indicators have reached or partially exceeded similar products at home and abroad, reaching the international advanced level." The relevant person in charge of new Wich said.
Xinweiqi was founded in 1993 by Professor Huang Shuhuai, former President of Huazhong University of Science and Technology. In 2003, New Wych successfully developed the first domestic electric screw press, filling the domestic gap. Since then, the company has accelerated toward industrialization, and has launched a series of high-end equipment such as servo direct drive electric screw press, die forging CNC servo hydraulic press, etc., to meet the domestic market demand at the same time, but also exported to Japan and other countries.
This is another breakthrough in the field of high-end equipment manufacturing achieved by this state-level specialized and newly focused "little giant" enterprise after the successful development of the first domestic 4000 tons servo direct drive CNC electric screw press and 1000 tons CNC servo hydraulic flat forging machine in 2023. The person in charge said: "The successful development of J58ZK-6300 servo direct drive electric screw press, while promoting the development of high-end aviation manufacturing technology, but also for China's advanced manufacturing equipment to provide a domestic alternative."